Skip to content

Commit

Permalink
Browse files Browse the repository at this point in the history
[efi] Add definitions of GUIDs observed when booting shim.efi and gru…
…b.efi

Signed-off-by: Michael Brown <mcb30@ipxe.org>
  • Loading branch information
mcb30 committed Aug 27, 2015
1 parent f0c6c4e commit a09dd5c
Show file tree
Hide file tree
Showing 6 changed files with 695 additions and 0 deletions.
301 changes: 301 additions & 0 deletions src/include/ipxe/efi/Protocol/SerialIo.h
@@ -0,0 +1,301 @@
/** @file
Serial IO protocol as defined in the UEFI 2.0 specification.
Abstraction of a basic serial device. Targeted at 16550 UART, but
could be much more generic.
Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/

#ifndef __SERIAL_IO_PROTOCOL_H__
#define __SERIAL_IO_PROTOCOL_H__

FILE_LICENCE ( BSD3 );

#define EFI_SERIAL_IO_PROTOCOL_GUID \
{ \
0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD } \
}

///
/// Protocol GUID defined in EFI1.1.
///
#define SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL_GUID

typedef struct _EFI_SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL;


///
/// Backward-compatible with EFI1.1.
///
typedef EFI_SERIAL_IO_PROTOCOL SERIAL_IO_INTERFACE;

///
/// Parity type that is computed or checked as each character is transmitted or received. If the
/// device does not support parity, the value is the default parity value.
///
typedef enum {
DefaultParity,
NoParity,
EvenParity,
OddParity,
MarkParity,
SpaceParity
} EFI_PARITY_TYPE;

///
/// Stop bits type
///
typedef enum {
DefaultStopBits,
OneStopBit,
OneFiveStopBits,
TwoStopBits
} EFI_STOP_BITS_TYPE;

//
// define for Control bits, grouped by read only, write only, and read write
//
//
// Read Only
//
#define EFI_SERIAL_CLEAR_TO_SEND 0x00000010
#define EFI_SERIAL_DATA_SET_READY 0x00000020
#define EFI_SERIAL_RING_INDICATE 0x00000040
#define EFI_SERIAL_CARRIER_DETECT 0x00000080
#define EFI_SERIAL_INPUT_BUFFER_EMPTY 0x00000100
#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY 0x00000200

//
// Write Only
//
#define EFI_SERIAL_REQUEST_TO_SEND 0x00000002
#define EFI_SERIAL_DATA_TERMINAL_READY 0x00000001

//
// Read Write
//
#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE 0x00001000
#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE 0x00002000
#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE 0x00004000

//
// Serial IO Member Functions
//
/**
Reset the serial device.
@param This Protocol instance pointer.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The serial device could not be reset.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_RESET)(
IN EFI_SERIAL_IO_PROTOCOL *This
);

/**
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
data buts, and stop bits on a serial device.
@param This Protocol instance pointer.
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the
device's default interface speed.
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
serial interface. A ReceiveFifoDepth value of 0 will use
the device's default FIFO depth.
@param Timeout The requested time out for a single character in microseconds.
This timeout applies to both the transmit and receive side of the
interface. A Timeout value of 0 will use the device's default time
out value.
@param Parity The type of parity to use on this serial device. A Parity value of
DefaultParity will use the device's default parity value.
@param DataBits The number of data bits to use on the serial device. A DataBits
vaule of 0 will use the device's default data bit setting.
@param StopBits The number of stop bits to use on this serial device. A StopBits
value of DefaultStopBits will use the device's default number of
stop bits.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The serial device could not be reset.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES)(
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
);

/**
Set the control bits on a serial device
@param This Protocol instance pointer.
@param Control Set the bits of Control that are settable.
@retval EFI_SUCCESS The new control bits were set on the serial device.
@retval EFI_UNSUPPORTED The serial device does not support this operation.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS)(
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
);

/**
Retrieves the status of thecontrol bits on a serial device
@param This Protocol instance pointer.
@param Control A pointer to return the current Control signals from the serial device.
@retval EFI_SUCCESS The control bits were read from the serial device.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS)(
IN EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
);

/**
Writes data to a serial device.
@param This Protocol instance pointer.
@param BufferSize On input, the size of the Buffer. On output, the amount of
data actually written.
@param Buffer The buffer of data to write
@retval EFI_SUCCESS The data was written.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_WRITE)(
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
);

/**
Writes data to a serial device.
@param This Protocol instance pointer.
@param BufferSize On input, the size of the Buffer. On output, the amount of
data returned in Buffer.
@param Buffer The buffer to return the data into.
@retval EFI_SUCCESS The data was read.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_READ)(
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
);

/**
@par Data Structure Description:
The data values in SERIAL_IO_MODE are read-only and are updated by the code
that produces the SERIAL_IO_PROTOCOL member functions.
@param ControlMask
A mask for the Control bits that the device supports. The device
must always support the Input Buffer Empty control bit.
@param TimeOut
If applicable, the number of microseconds to wait before timing out
a Read or Write operation.
@param BaudRate
If applicable, the current baud rate setting of the device; otherwise,
baud rate has the value of zero to indicate that device runs at the
device's designed speed.
@param ReceiveFifoDepth
The number of characters the device will buffer on input
@param DataBits
The number of characters the device will buffer on input
@param Parity
If applicable, this is the EFI_PARITY_TYPE that is computed or
checked as each character is transmitted or reveived. If the device
does not support parity the value is the default parity value.
@param StopBits
If applicable, the EFI_STOP_BITS_TYPE number of stop bits per
character. If the device does not support stop bits the value is
the default stop bit values.
**/
typedef struct {
UINT32 ControlMask;

//
// current Attributes
//
UINT32 Timeout;
UINT64 BaudRate;
UINT32 ReceiveFifoDepth;
UINT32 DataBits;
UINT32 Parity;
UINT32 StopBits;
} EFI_SERIAL_IO_MODE;

#define EFI_SERIAL_IO_PROTOCOL_REVISION 0x00010000
#define SERIAL_IO_INTERFACE_REVISION EFI_SERIAL_IO_PROTOCOL_REVISION

///
/// The Serial I/O protocol is used to communicate with UART-style serial devices.
/// These can be standard UART serial ports in PC-AT systems, serial ports attached
/// to a USB interface, or potentially any character-based I/O device.
///
struct _EFI_SERIAL_IO_PROTOCOL {
///
/// The revision to which the EFI_SERIAL_IO_PROTOCOL adheres. All future revisions
/// must be backwards compatible. If a future version is not backwards compatible,
/// it is not the same GUID.
///
UINT32 Revision;
EFI_SERIAL_RESET Reset;
EFI_SERIAL_SET_ATTRIBUTES SetAttributes;
EFI_SERIAL_SET_CONTROL_BITS SetControl;
EFI_SERIAL_GET_CONTROL_BITS GetControl;
EFI_SERIAL_WRITE Write;
EFI_SERIAL_READ Read;
///
/// Pointer to SERIAL_IO_MODE data.
///
EFI_SERIAL_IO_MODE *Mode;
};

extern EFI_GUID gEfiSerialIoProtocolGuid;

#endif

0 comments on commit a09dd5c

Please sign in to comment.